2011 Ic Bus Fecb problems, complaints & recalls
Safety recalls (3)
Equipment Adaptive/Mobility 2015-12-23 · campaign 15V870000 · 68 vehicles
Defect: Navistar, Inc. is recalling certain model year 2007-2015 IC CE transit buses, 2008-2011 IC FE transit buses and 2009-2013 IC RE transit buses equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.
Risk: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.
Fix: Navistar will notify the purchasers of the lifts, and dealers will inspect the link arms for damage or for displaced bearings. The platform will be inspected for cracks. Any damaged parts will be replaced, free of charge. The recall began on February 19, 2016. Owners may contact Navistar customer service at 1-800-448-7825. Note: These buses and wheelchair lifts were subject to a similar recall in 2014. All vehicles that received that recall remedy are still affected by this recall as well.
Equipment Adaptive/Mobility 2014-11-03 · campaign 14V691000 · 68 vehicles
Defect: Navistar, Inc.(Navistar) is recalling certain model year 2007-2015 IC CE transit buses manufactured January 23,2006, to May 12, 2014, 2008, and 2011 IC FE transit buses manufactured October 5, 2006, to September 28, 2009, and 2009-2010, and 2013 IC RE transit buses manufactured September 19, 2007, to November 29, 2011, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation after January 1, 2006. The platform side plate of the
Risk: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.
Fix: Navistar will notify owners to take buses to a Ricon dealer or service center who will install supplemental platform support bumpers. Any platform that has already started cracking will be replaced, free of charge. The interim notices were mailed on December 29, 2014. The recall began on January 29, 2015. Owners may contact Navistar customer service at 1-331-332-1590 or Ricon customer service at 1-800-322-2884. Navistar's number for this recall is 14517.
Equipment Adaptive/Mobility 2010-06-14 · campaign 10V257000 · 20 vehicles
Defect: NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2009 THROUGH 2011 IC CE, FE, RE, AND BE MODEL NON SCHOOL BUSES MANUFACTURED FROM DECEMBER 10, 2007 THROUGH JANUARY 12, 2010 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LA
Risk: THE USER OF THE LIFT COULD BE INJURED SHOULD THE LIFT MOVE WITHOUT THE RESTRAINT BELT PROPERLY BUCKLED.
Fix: NAVISTAR IS WORKING WITH RICON AND RICON WILL BE PERFORMING THE REMEDY FOR THIS CAMPAIGN. PLEASE SEE RICON'S DEFECT REPORT 09E-060. RICON WILL PROVIDE CUSTOMERS WITH A WARNING DECAL AND A DVD-BASED TRAINING AID. THE SAFETY RECALL BEGAN ON JULY 1, 2010. OWNERS MAY CONTACT RICON AT 1-818-267-3000 OR NAVISTAR AT 1-800-448-7825.
Service bulletins (133)
Technical service bulletins are repair instructions manufacturers send dealers for known issues. Unlike recalls, the fix is not automatically free — but naming the bulletin at the service desk can save diagnosis time and support goodwill repairs.
Electrical System 2026-07-30 · IK2600052 · Service Bulletin/Repair Instructions
this article describes how to fix a speedometer that does not read accurately. an inaccurate speedometer can be caused by changing the tire size, changing rear axle ratio (rar), or by parameters being inadvertently changed during a programming event. use the formulas and calculator below to correct
Electrical System 2026-07-23 · IK0800303 · Service Bulletin/Repair Instructions
vehicle is experiencing a condition where the odometer automatically moves up 0.1 km every time the ignition switch is turned on.
Engine 2026-02-05 · IK2600090 · Other
new carb idle reduction change request
Electrical System 2026-02-03 · IK4300035 · Service Bulletin/Repair Instructions
this tool is designed to compare diamond logic feature data across multiple vehicle configuration files. it allows users to quickly load files either manually or directly from the diamond logic builder vehicles folder using vin-based selection. as files are added or removed, the comparison runs auto
Engine 2026-01-26 · IK2600255 · Other
this document provides guidance for assessing the feasibility of implementing a customer-requested change to an engine or vehicle parameter/feature. customer requested changes will be approved in accordance with the requirements specified in 40 cfr part 1037 to ensure continued compliance with green
Engine 2026-01-02 · IK2600047 · Service Bulletin/Repair Instructions
engine replacements for all international engines will need to follow this procedure.
Showing the 6 most recent of 133 bulletins. Search all of them free at nhtsa.gov.
What owners report
No detailed complaint narratives on file.
Excerpts of consumer complaints filed with NHTSA, lightly truncated. They are owner statements, not verified findings.