2022 Terberg Benschop B.v. Terminal Tractor problems, complaints & recalls
Safety recalls (2)
Suspension:multiple Axle 2023-12-05 · campaign 23V815000 · 3 vehicles
Defect: Terberg Benschop B.V. (Terberg Benschop) is recalling certain 2021-2022 YT193 terminal tractors. Paint on the mounting surface of the steering linkage can wear off, which may cause the bolt to become loose or break, resulting in a loss of steering control.
Risk: A loss of steering control increases the risk of a crash.
Fix: Dealers will disassemble, clean and reassemble, the steering linkage mounting surface, free of charge. Owner notification letters were mailed February 19, 2024. Owners may contact Terberg Benschop customer service at 348459294. Terberg Benschop's number for this recall is CAM0156.
Suspension:multiple Axle 2023-11-13 · campaign 23V764000 · 1 vehicles
Defect: Terberg Benschop B.V. is recalling one 2022 YT193 terminal tractor. The eight non-self-locking flange nuts that attach the steering front axle to the front axle suspension may come loose.
Risk: A loose steering front axle can cause a loss of steering or braking ability, increasing the risk of a crash.
Fix: A dealer will replace the non-self-locking nuts and add thread lock as necessary, free of charge. The owner notification letters were mailed December 05, 2023. The owner may contact Terberg customer service at 1-348-459-294. Terberg's number for this recall is CAM0152.
Service bulletins (4)
Technical service bulletins are repair instructions manufacturers send dealers for known issues. Unlike recalls, the fix is not automatically free — but naming the bulletin at the service desk can save diagnosis time and support goodwill repairs.
Electrical System 2026-03-17 · 40-0053 · Service Campaign
it was found that a wrong relay was installed in the starting circuit of the engine for the yt dot vehicles. the relay swiches a 12 volt circuit, but is operated via 24 volt. currently a 12 volt relay is installed. over time this relay can fail due to the applied current on the coil being too high.
Engine 2026-01-16 · 20-0033 · Service Campaign
during the initial phase of series production of the yt193 dot vehicle, terberg implemented several product improvements aimed at enhancing reliability and uptime: aftertreatment system cover: the shape of the cover has been redesigned to prevent contact with the air inlet. air intake noise damper:
Suspension 2025-11-21 · 60-0004 · Service Bulletin/Repair Instructions
since the introduction of the volvo fa8.2 low front axle t18013960 in 2018, there have been two updates to this axle design. however, the timing of these updates in production has not always been aligned with their appearance in the parts manuals. as a result, the axle listed in parts online may not
Engine 2025-11-21 · 40-0001 · Service Bulletin/Repair Instructions
the term kl50, originates from the german din 72552 standard for automotive electrical terminal designations. it specifically refers to the starter control circuit. this is the wire that carries the positive signal (+12v or +24v, depending on the system) to the starter motor's solenoid when the igni
What owners report
No detailed complaint narratives on file.
Excerpts of consumer complaints filed with NHTSA, lightly truncated. They are owner statements, not verified findings.